Snort is a free and open source network intrusion prevention system (NIPS) and network intrusion detection system (NIDS)
Snort's open source network-based intrusion detection system (NIDS) has the ability to perform real-time traffic analysis and packet logging on Internet Protocol (IP) networks. Snort performs protocol analysis, content searching and matching. These basic services have many purposes including application-aware triggered quality of service, to de-prioritize bulk traffic when latency-sensitive applications are in use.
The program can also be used to detect probes or attacks, including, but not limited to, operating system fingerprinting attempts, common gateway interface, buffer overflows, server message block probes, and stealth port scans.
Snort can be configured in three main modes: sniffer, packet logger, and network intrusion detection. In sniffer mode, the program will read network packets and display them on the console. In packet logger mode, the program will log packets to the disk. In intrusion detection mode, the program will monitor network traffic and analyze it against a rule set defined by the user. The program will then perform a specific action based on what has been identified.
Please contact us to learn how SNORT can help your network Management and security solutions.
1.0 SNORT INTRUSION DETECTION- snort.org
2.0 Applied Security Monitoring- ISBN -978-0-12-417208-1
Network Managent Solutions integrated with Open Source security solutions make a powerful Solutions for large and small enterprise. Network management solutions like OpenNMS and Nagios provide the basic framework for the Monitoring and logging Network Events and SNMP traps for the devices connected to network.
Network security and intrusion detection is critical component of business network. Open source intrusion detection software like OPENSEC and Snort provide bulk of the intrusion detection facility.
OSSEC is a free, open-source host-based intrusion detection system (HIDS). It performs log analysis, integrity checking, Windows registry monitoring, rootkit detection, time-based alerting, and active response. It provides intrusion detection for most operating systems, including Linux, OpenBSD, FreeBSD, OS X, Solaris and Windows. OSSEC has a centralized, cross-platform architecture allowing multiple systems to be easily monitored and managed.
OPSEC integrates with your Cloud and Network Infrastructure to provide enterprise security. We work with OSSEC, Snort, Nagios, OpenNMS and Openstack cloud to provide an integrated solutions. Please contact us for details.
1.0 Network Security - Stallings
2.0 Network Management- Mani Subramanium
3.0 Nagios- nagios.org
4.0 OPENNMS- Opennms.org
5.0 Open Source security- OSSEC- https://ossec.github.io
6.0 Intrusion Detection - SNORT- snort.org
7.0 Network Management- Georgia Tech
If your organization uses multiple spreadsheets across organization for information storage and reporting, you need to consider a database for efficiency and productivity.
Microsoft Access is a database management system (DBMS) from Microsoft that combines the relational Microsoft Jet Database Engine with a graphical user interface and software-development tools. It is a member of the Microsoft Office suite of applications, included in the Professional and higher editions or sold separately.
Microsoft Access stores data in its own format based on the Access Jet Database Engine. It can also import or link directly to data stored in other applications and databases.
Software developers, data architects and power users can use Microsoft Access to develop application software. Like other Microsoft Office applications, Access is supported by Visual Basic for Applications (VBA), an object-based programming language that can reference a variety of objects including DAO (Data Access Objects), ActiveX Data Objects, and many other ActiveX components. Visual objects used in forms and reports expose their methods and properties in the VBA programming environment, and VBA code modules may declare and call Windows operating system operations.
Please contact one of our developers for initial consultation.
1.0 Access 2016 Bible 1st Edition- ISBN-13: 978-1119086543
Definition of Information Technology Service Management
IT service management (ITSM) refers to the entirety of activities – directed by policies, organized and structured in processes and supporting procedures – that are performed by an organization to plan, design, deliver, operate and control information technology (IT) services offered to customers. It is thus concerned with the implementation of IT services that meet customers' needs, and it is performed by the IT service provider through an appropriate mix of people, process and information technology.
Differing from more technology-oriented IT management approaches like network management and IT systems management, IT service management is characterized by adopting a process approach towards management, focusing on customer needs and IT services for customers rather than IT systems, and stressing continual improvement.
The IT Chaos and Solutions Process
Now a days, the future of a company appears to hang almost entirely on Enterprise e-commerce and mission critical ERP. The political storm brewing behind such projects, led by the marketing manager and hidden agenda, adds further tension. Faced with the conflict of E-commerce and ERP requirements against firefighting and competing projects, IT manager and his team enter a spiral of problems, mistakes, gloom and despair. Thanks to a growing insight into Lean, Agile and DevOps concepts, IT manager and his team can gradually evolve their way of working. By the time NextKillerProject arrives later in the scenario, they’re able to release and support the project reliably, efficiently, and emerge with strengthening morale out the other side. Value of central change management and Information Technology Service Management (ITSM) is proved and demonstrated to know-all skeptics. No more hardware upgrades causing software firefighting and vice versa.
A Keen Computer Observation
The problem addressed by ITSM has appeared in almost all the organization that has formal and informal IT department. The problem the ITSM addresses is not only technical like network management or software development- it encourages a culture of system level thinking and teamwork. The central change management, testing and experimentation, rollout and rollback scenario consideration is crucial for success.
ITSM stresses the fact that Systems Engineering is necessary for avoiding core IT chaos involving Software, Hardware and IT fire-fighting and finger pointing with individual inner agenda and organizational politics . It’s not the case that, DevOps and Agile approaches to working have magically evaporated all the challenges facing a normal organization. Conflict, incidents and mistakes are inevitable – what counts is how team members grow to manage and resolve them using Systems Engineering principals . In the end the organization must have structure, process, and a more open attitude to change and adaptation to stand them in good stead. An approach to System Level thinking and systems approach is necessary
At its most practical, The ITSM is an illustrative series of process and suggestions for ways to evolve IT from a function that’s viewed as a bottleneck to one that’s widely agreed to be an indispensable capability. And at both levels, The enterprise ERP and E-commerce needs DevOps that includes the wider organization, and the wider organization can learn a lot from DevOps and ITSM.
Please contact one of our Engineers for initial consultation.
1.0 The Phoenix Project:A Novel about IT, DevOps, and Helping Your Business Win ISBN-13: 978-0988262508
A little while ago I wrote a very loose account of my experiments to evaluate my own use of Solid State replacements for spinning hard drives. The result was I acquired two devices and now have them in use. This is about the final installation and actual use for the first sixty days. I hope this will encourage others to try similar upgrades.
In another article I have expounded my relatively easy transition to an all laptop “portable” network. IT has changed position in my life and become more hobby than calling. I am retired so I work more with cameras than computers. I now live in an apartment rather than a home of my own. The need for easier dismantle and setup of the network became an issue and I successfully (my viewpoint) made the transition.
There is one disadvantage to being all laptop, it can become very expensive to have the fastest equipment. In my somewhat constrained retirement I must watch that I do not overspend! So I tend to buy equipment from the most economically priced sources. I cannot afford much brand loyalty. My choices are therefore not based on such preferences, unless I can get my preferred choice on sale. That process is what controlled my SSHD experiments in 2016.
Installing the SSHDs actually became an exercise in drive swapping because I had both my acquisitions in three different laptops over a period of six weeks. I have two 17” HP pavilion laptops (the older one fading) and an Acer Aspire. That older HP is now almost nine years old and is being gradually retired but served as one test bed. Both drives were tested in all three and performed beautifully. The final choice was the newer HP which is now my main workstation, and the Aspire which is my transportable photo lab (yeah! think darkroom!). The older HP (I lovingly call the “beast”) has become my lab rat for other projects and now only has one spinning drive.
So I have made my choice and lets look at the short term results.
The newest of my two HP Pavilions. This laptop is no spring chicken. I purchased in new in 2011 and it ran Windows 7 Pro for almost five years. I had always intended it as a replacement for the “beast” (my older HP 17”) and to be a Linux system. However the beast soldiered on and being lazy I did not make the switch. Finally, a major change in my photo equipment forced my hand. My Linux systems running Slackware became less desirable because I needed constantly up-to-date software and wanted an easier update process. Maintaining the latest possible version of digiKam became by itself a very time consuming issue. After considerable testing (basically trial and error) I elected to move to Mint 18.0.
The 17” HP laptop can install two hard drives so I set it up as a hybrid. First I installed a second spinning drive (750Gb) and tested that with already installed Slackware Linux, to ensure no problems. Then I replaced the first hard drive with the smaller of my acquired SSHDs (500 Gb). This drive was then freshly loaded with Mint 18.0.
The result was really gratifying. The boot time went from almost 90 seconds, with all spinning drives, to about 20 seconds with Linux on the SSHD. This performance has been steady now for about two months and I am very pleased.
I use this laptop for email, accounting, writing (this for example) and occasional photo work. Most of my photo editing is done on the portable lab Acer Aspire so I only edit images occasionally on this machine.
The total drive space is over 1.2 Tb of which 750 Gb is spinning and assigned entirely to data. All the OS and software is on the SSHD which speeds up loading. The surprise for me is that working with images on this system is not significantly slower than the Acer Aspire.
This is the Acer Aspire. The second SSHD I acquired is almost 1 Tb. Since the Acer can only accommodate a single drive this was the one choice possible, that it should be the large SSHD.
One of the reasons I looked for SSHDs in the first place arose from massive increases in image data. Recent digital photography advances have cameras using sensors with very large image files. Close to 25 mega pixels for smaller cameras, approaching 50 mega pixels for “full frame” cameras, so called “medium format” camera up to 100 mega pixels. I have not yet gone that far. The images I store currently are about 6-8 Mb for an APS-C sensor and 15-23 Mb for a full frame camera. That is for JPEG images. Both sizes of camera also can take simultaneous RAW images using total storage up to over 40 Mb for a single image. Moving all this image data can be a network killer too! Yes, good cameras are expensive in storage costs. My older camera at 10 mega pixels was not quite so expensive in storage. Greater image color quality, dynamic range and detail does have a cost.
In case the thought has not occurred, you cell phone and tablet shooters are getting up there too!
Once the Acer Aspire was setup with Mint 18.0 I loaded the image viewing and processing software which revels in the faster access. Image loading time are not significant faster so I suspect display is taking more that I realize. For photo aficionados I actually do use all I have loaded! The software includes digiKam, Darktable, GIMP, Gthumb, Gwenview, Krita and various other useful packages.
DigiKam and Darktable are image collection managers. DigiKam also includes excellent editing capability and I tend to use that most.
Gimp and Krita are image editors requiring some education and benefit from user experience. The rest are for viewing.
I was skeptical about the advantages of SSHDs for a basic user like me. When you are used to the performance of spinning drives there does not seem to be a over riding need to change. I now feel differently and am really glad I made the move. Black Friday sales made is possible from a cost point of view. I did spend about sixty hours playing, and installing Linux to select my upgrade, a week (about) of testing time and appropriate stress. Looking back it was time well spent. I am a happy user.
One deduction from this brief experience: if you have multiple drives, upgrade the operating system drive first then put all program files on that drive if possible. In my setup it appears that that is the biggest bang for the buck. If you have sufficient coin left over for another SSHD the choice is less marked but you will gain in faster access and data transfer, it will not be quite so obvious. Bear in mind that most laptops are single drive, fortuitously both the HP 17” Pavilions I have allow two.
I should add that in both final configurations I also placed the Linux “swap area” on the SSHD. I have not yet determined that this actually the route to go, it just seemed a good choice, since I deal with large image files it seemed to me to be the best idea.
The final performance picture is very nice and makes more powerful laptops less a requirement. When you are retired that time is enjoyable and compared to other costs relatively cheap. The whole process was fun. My experience was part of that fun and suggests to me that with SSHDs and Linux almost anyone can easily upgrade a laptop. I was lucky with the sales, what somebody else may pay is likely to be a bit more. It is probably well worth it. I will now consider an SSHD as a logical and highly desirable upgrade, especially when breathing life into an older laptop with Linux. One small caveat: if the laptop is more than 10 years old be very careful as usb and other ports may not be suitable and (as far as I know) there is no IDE SSHD available, there is such a thing in laptops as TOO old!
If I have made this laptop upgrade seem too easy I apologize. Once the decision was made, really it was not a very difficult process. Simple maintenance in any computer usually involves simply changing a component. I encourage people to do that if they have the time and interest. Opening up most laptops is a bit more of a challenge than a desk top unit, good Internet advice is out there for most brands.
To get started look up your laptop on the Internet. You will probably find a You-Tube video or something similar to show how to do what you need. I have seen Acer, HP and others. Unfortunately some are not shown or some are very difficult to dismantle. You can still select the part you need and ask for help to install it. Many forums provide this aid.
Hard drives, memory and batteries are the commonest items needing replacement. Make sure you are getting the correct part, after that
skill with small hand tools is useful. You can get help or at least ask for hints. I have changed screens and keyboards too but that can be a real challenge.
Telling this story has found a number of people like minded. Please do more for yourself, it is fun and success is at least as good as a tonic. If you need help there is an amazing amount on the “net” and you will find a huge amount of support for Linux too. Enjoy!
This is the final part of my “portable” network saga. I am actually using the product of all I have written about. My network is easily transportable in two “wheelie” cases. Tear down and setup about as easy as I can get. Flexible and practical as I intended. For now I have met my objective. Read on for a description of the product.
As I have previously said in my writings since my retirement: I have almost abandoned brands as a guide. I do have brands I would prefer, largely because of favorable experience. However, like most retirees I must watch what I spend. As a result I find myself looking more for favorable prices rather than perceived quality.
As a consequence I often buy refurbished gear rather that the latest offering. I have found this approach to be quite successful. I do check what I am saving, evaluating the possibility of taking some other customers problems against that difference. I avoid buying “refurbished” when the price difference is too small or the device too risky. In addition, I look at whether a new or refurbished device is available through E-bay at a saving for a delivery wait.
Much of what I do is therefore done a the lowest cost I can achieve without risking scams. E-bay is good with their operating criteria. Most of the on-line suppliers I deal with offer unconditional returns, the few problems I have had have been well supported. My approach, used carefully has been very cost effective.
In a long IT career I accumulated a number of useful accessories which I have put into use in handling my network. I will not be too specific but is makes the overall cost a lot less. I am finding use for things that almost got discarded. In fact, largely because I am a pack rat by nature, that retention has been a bonus. This has been particularly applicable to computer luggage.
I am not running a computer museum but still have useful leftovers from my business career: laptop cases, sleeves, including a couple of very capacious “wheelies”, cables (not much used now) and assorted spares including an assortment of IDE drives. Pretty much all of this is in use again.
In my final years in my house I also acquired an assortment of small folding tables. They are all collapsible and pretty much portable. Inexpensive but durable, they are the nucleus of making my network convenient. Lets face it, all these laptops are not going sit in one lap, as I age probably not even mine. I do have a larger table too, but only one is really essential. I keep that for the router and assorted other things needed on a daily basis.
The equipment list is actually quite extensive. Each laptop has its own mouse. I have things like mouse pads and thumb drives and of course backups.
Communications is handled by a Netgear wireless router, one of the more expensive purchases I have made. After dubious experience with other lower cost units (short life) I decided to cut my losses and buy a better unit. It is more nearly at commercial business level. The router is connected to my ISPs modem. Also attached: a larger printer ( 8 year old wide Epsom Photo) and a 4 Tb backup drive. These attachments are about to move, I am not sure where or how!
The router has dual frequency ability and I have router to server running on the 5 Ghz band. The capability allows for support of devices workable at either 2.4 Ghz or 5 Ghz. This really gets the best out of the network and the Internet.
The computer “server” in all this is a refurbished HP Elitebook with a 14” display (yes we really are ALL laptop here). The price was very reasonable. It runs Window 10 Pro. Attached are two printers: a 10 years old Canon iP5000 and a Brother label printer connected through a USB hub/card reader. Also attached is a 5 Tb hard drive (spinning) which is my current network backup. This laptop is connected to the router on the 5 Ghz band.
My main personal workstation is my newest HP 17” Pavilion. It runs Linux Mint 18.0 (18.1 when I can find time) and has a full range of all the software that I use including Google Earth. Now installed is 500 Gb SSHD for operating system, application programs and e-mail. The second drive is 750 Gb spinning drive which is used solely for data. The swap area for the OS is also contained on the SSHD, in practice this is little used as the actual core is large enough to be effective for most situations. Connection to the network is at 2.4 Ghz using the internal adapter.
My portable photo lab is running on my Acer Aspire. Smaller and lighter than the HP Pavilion and therefore more easily portable. It has only capacity for a single drive and the 1 Tb SSHD is installed. In this case the operating system is Linux Mint 18.1. In effect it is a near duplicated of the main workstation except that the e-mail system is NOT duplicated, nor is Google Earth loaded. It is also communicating via its 2.4 Ghz internal adapter. For my two Linux workstations I am trying to upgrade the network via 5 Ghz dongles – drivers are holding that back.
My Windows workstation is a low level HP 15.6” Notebook with no optical drive. Installed is a 500 Gb hard drive (spinning) which only partially used other than to support Windows 10 Home. The software includes the preinstalled Windows adjuncts. Added are copies of Libre Office and Google Earth. Google earth is my primary reason for having this workstation. However, I also need a system to support my cameras with firmware updates. I have Sony cameras and I have not been able to provide support via a Linux system (Sony seems to ignore Linux). The laptop was acquired through the sales last Christmas at a very reasonable price to solve the Sony support and provide Google Earth in a fully functional way. Wireless communication is at 5 Ghz (an inexpensive dongle) which make Internet and hence Google Earth very good. The transfer speed achieved is very high to the Internet. Considerably better than that achieved over 2.4 Ghz.
That is the basically the current version of my resident network layout that I use all the time.
I have run Google Earth on most laptops I have used in the last 10 years. That includes when I was using KDE 3 and KDE 4 on Slackware. There has always been some difficulty on 64 bit systems. I was always able to work around these problems by running a full suite of 32 bit libraries on the 64 bit OS. Unfortunately I have not been able to get full capability for Earth on Linux Mint, it can be run but it has some annoying problems with the embedded photos. At present there are two different protocols at play, Panaramio and 360cities.
Panaramio is undergoing a massive change, anyway. I have not fully researched where Google is going to end up. The installs I have done using MINT 18.0 and 18.1 have problems with displaying photos as Panaramio expects. A partial cure which generally seems to work for me: zoom in until groups mostly separate into individual shots ( some grouping do not separate). Single shots will then display. You will need to experiment to find how to exit from a photo display.
369cities are special zoom into pannable 360 photos. Displaying the access photo (single click) will not initiate the zoom. The cure for me: place your cursor on the 360 button until it display the description and the do a fast double-click, that generally seems to work. It also helps to zoom in so the button is clear of all other photos and featured buildings.
Mint provides a special Google Earth install program, for me it does not work easily and these two anomalies seem to persist. Neither is a game changer but are irritating. I have no idea why this happens. Current Mint and Kubuntu are both Debian derivatives and seem to have problems. (For the uninitiated Debian is a very good Linux distro) In earlier Kubuntu releases I had no problems, I have not had time to research the issue thoroughly. I suspect that Earth being basically a 32 bit program may be at play, I hope Google is moving it to a fully 64 bit Linux capability. The best results I have achieved are using the Google release for Debian.
The result of this is I do Google Earth work on my Window Workstation which has a 15.6” display. Occasionally I do it on a little HP Stream 11, which is really too small, unless you have better eyesight than I do.
I am truly over connected! I am not typical of my age group as I come from a long IT career history. I have several devices which despite my age I use almost every day.
I attach to the network when using these devices as they are basically dependent on that connection.
Netbooks: a Samsung Netbook with only a 10” screen and the HP Stream 11 These are both too small for anything other than occasional use, too much eye strain. I use them as occasional test beds when I do not wish to configure a workstation. I also have refurbished small Chromebook 11 that I play with, cost me less than $100 for entertainment. When I get tired of Chrome maybe I’ll try Linux on that device..
Tablets: a Samsung Galaxy Note 8 (16 Gb) running Android 4.4 and a Sony Xperia 10 (32 Gb) running Android 5.0, both seem to have reached the limit of their OS upgrade from the manufacturer. I have have a 64 Gb micro SD card on each of them (I am a storage hog). The Galaxy is a nice tablet and is now five years old. I still use it and love it but serious work is done on the Sony because of the bigger screen Storage is also a difference favoring the Sony. I now do my reading on the Sony, better in both screen and speed over my reader. Both communicate over the 5 Ghz band.
Cameras: are all Sony now and can communicate at 2.4 Ghz except an older DSC-R1 (10 Mpxl) which has no wifi capability. All the laptops have SDHC readers built in and I use those more than wifi. The DHC-R1 uses compact flash rather than SD cards so I use the slots in a USB hub/card reader (now 8 years old). I have a replacement hub/card reader still in its box!
Reader: a Kobo Arc (32 Gb) is a nice reader but I rarely use it now. Purchased in 2012 it runs Android 2.2 and is abysmally slow even with 32 Gb storage. It is basically a 7” tablet
Ancient: my original HP 17” Pavilion is still working well. I use the “beast” as a testbed and it is destined for my next project. It still has a nice 750 Gb spinning drive even if the display means eye strain. With an external monitor it may yet do good things.
The old laptops that were the slippery slope into Linux, they had too few or no USB ports. IDE drives and the screens were fading to mud. They are gone to the last lap!
I am happy that I have a fairly neat and clean (and portable) network. However, technology and age wait for no man, it probably will not be a long period of content.
I have used all my past experience and adapted as much as I could afford. Considering that I started on this project late in 2006, urged on by 2010 events and there has been much technical progress, I am amazed at how current the final product really is. Most of the credit for success is really attributable to the use of Linux. Because of Linux I have always had a current operating system. The cost of that has been keeping my knowledge current enough to do all this myself, I have never found that to be a strain. I cannot say the same for my vehicle which tests me every day.
Since 2011 I have spent about the equivalent of about 2 months rent on my network and computing. I have made two purchasing errors in that time to the tune of about $350 which, in hindsight, contributed to my education but not the network. On a pension that is not chump change!
At no extra financial cost, I am still looking for my perfect Linux distro. That alone will keep me from becoming bored. Maybe this article will prompt the perfect Linux distro for photography wonks and maybe I’ll live to see it. That 100 year old man in the corner loading Linux on an old Chromebook? That is probably me!
This marks the second and longest part of my struggles with laptops. In fact the struggle has mostly been the need to adapt to change, both in my circumstances and technology. It has been enjoyable. This part gets more specific at greater length about choices and technicalities, loosely documenting my experience putting the technology together, the nitty gritty so to speak. I have a general objective: create a flexible and comprehensive photography support system, to my taste!
The network I grew in Part 1 of this discussion did not happen by a magic trick. It has been a considerable adventure. The process has not been onerous but has had some challenges.
I am by nature a rather lazy guy and tend to take the path of least resistance. Knowing all this, some of my sceptical friends have suggested that moving away from Windows was not a good move. “Stupid”, “insane” and “masochistice” are some of the milder epithets cast my way. More understanding has come to them recently, the adjectives have declined with the invective. A recent discussion produced a “couragious” designation, so I have decided that I can believe in what I am doing, it is a success for me.
As specified I am lover of Linux, specifically Slackware, until recently using that as my laptop OS of choice. I came by that choice for laptops because it was so controllable and simple to understand. I have used Slackware for about 20 years as my server OS of choice for terminal based applications, often with terminal based user systems actually running Windows with an emulator, with the application system based in the Linux server.
This Windows/Linux hybrid approach has served me well with insurance systems, garment systems and some other clients. My use of Slackware as a user system – a fully servicable KDE desktop with very good local power - was a logical step.
Slackware has been a very complete distribution, a very good operating system for learner and tyro alike. Included is a full slate of useable applications. It networks reliably and easily. It includes all of the application aspects of the KDE and Gnome desktops. It allows the installer to choos KDE or Gnome, besides other desktops, as a working choice. It includes most of what I need in my daily computer use. However, the stated intent of the distribution has been to allow the user complete choice in almost everything, making some applications packages quite difficult to install. This can be particularly time consuming with packages of a specialised nature, in my case digiKam and related applications. Ideally I would like to have the very latest, to match with the excellent manuals now available and, not the least, to keep up with advances in photo gear I am involved with.
To my disappointment, I have been unable to achieve photo software nirvana. Not with the high work level requred for Slackware to maintain packages. Not with any of the alternatives I have tried. I have settled on a distribution having continuous available update as a feature. I still love Slackware for its stability and ability to adjust as I needed. However, as a retired computer techie it simply is too much for my age bracket and time available.
The addons that I need arise from my interest in two areas: I am a photographer, I have a strong interest in on-line security. The albatross is too heavy for this “ancient mariner”!
Loading and using digiKam, which I believe to be just about the most adaptable and powerful workflow system available for photographers, became extremely complex with Slackware. Finding the supporting libraries and related loads was almost a career in itself. In fact, I was unable to get digiKam 5.0 to load and run after a week of fiddling. Total frustration arising from the need for supporting software libraries. This should be easier than it is.
So I abandoned my wish to run a fully up-tp-date version with Slackware. I was prepared to compile what I wanted but could not succeed at that more lofty approach. I appreciate that the problem is me! It is no discredit to the application or Slackware. Other users have told me I am not alone, some very nice software is going unused for exactly these reasons. Locating the supporting libraries is definitely an issue, even when one knows in detail what is required. Often these libraries are part of a package of related library software. The problem can be resolved but takes a lot of time and research. The developers of digiKam do provide a list but it has not solved the problem for me.
Network security is another personal interest and an entirely different problem. Again add on libraries can cause a problem during some package installation. This is much more easily solved as the distribution called Kali Linux has all the answers (maybe that is over stated) at least as it appears to me. So I have Kali, with a laptop system to run it, ready to install. That will happen as soon as I have my laptop network settled down from the latest upheaval. Kali is a different next big project.
So finding a new system to replace my almost complete dependence on Slackware has become the latest sub project occupying my time
Even considering the time I have spent with the net finding libraries, Slackware has been really easy for me and exceptionally reliable. I have been using it on my laptops since I disposed of Windows Vista for good in 2008. After using it for several years as a server OS. Bluntly – I love Slackware and became very comfortable with the KDE destop, choosing KDE rather than other desktops offered with this distributiion.
Originally, prior to 2008. I had been a user of Microsoft Outlook, Word and Excel. They were my most used software. After that I had also added “PaperPort”, Adobe Photoshop and followed the path most users did for software. Buying what I needed at often ridiculous prices. If I add the cost of software my Windows XP laptop actually rose from a price of about $3,000 to well over $7,000 (all Canadian), over its life of about eleven years. I had decided that the tool was much too expensive, well before I embarked on my “laptop network” and downsize project.
To provide an experience base I decided not to throw good money after what was already spent. I upgraded the Windows laptop to a larger hard drive and started loading whatever “free and open source” software I could find. I used free software wherever possible. Occasionally I ran into strange incompatibilities. A typical example: in 2009 one Power Point presentation loaded into Open Office gave a file error when copied from an origin MS Office presentation. It turned out that the problem was on the MS Office side when a file was improperly closed. But that was a small problem disposed of when using Open Office to develop the PP-style presentation. Yes, my attempt to move into free software did have some strange incompatibility “glitches”. However they were few. Since I had both software products not often a problem.
I have had no problems since 2011. All problems I encountered before that date generally involved exchanging files with other users
All this experimentation raised my confidence in and appreciation of the “free and open” product range. This did not extend to a Photoshop replacement immediately, that is a different journey.
I lived with a total replacement for the Windows laptop as I did more and more work solely on my Slackware conversion of the HP Pavilion 17” originally acquired with Windows (gasp) Vista. Only occasionally did I revert to the Windows XP system, by 2011 it was all on the Slackware loaded laptop except for some more pernickety photo work.
I added to the Slackware system gradually. First by upgrading with all the releases from Slackware: passing from 11.0, through the 12 series to 13. I encountered my first major change moving fron KDE 3 to KDE 4. The applications I used had improved in ease of use and competetive features throughout the period, I could edit photos, edit/show videos, work with any document format, any spread sheet format, play music and completely replace what I had been doing under Windows XP.
At some point, I cannot remember the exact timing, I switched from Open Office to Libre Office to get an improvement in some features. I found I liked Libre Office better and have stuck with it, an entirely personal preference. The differences are actually minor I think.
I had been using KDE 3 as my desktop until I switched to KDE 4 in 2013. What I now had was a desktop system which bettered anything I had seen before. The change was quite startling when compared with the Windows range. I particularly liked the features and customization abilities of KDE 4 its early releases provided. I benefited from a degree of control and reliability, with few glitches of any kind. My workflow developed to a level where almost everything came readily and intuitively. I loved it. I upgraded no further, preferring to wait for a major change.
I personally prefer the layout and appearance of KDE interface features. So I will still be with KDE 5 for the forseeable future. I have tried other desktops and still have this preference. In 2017 some changes I dislike in KDE have forced me to think of moving to a different desktop. However, although I have tried several distros using different UI appearance, looked at others, I am still using KDE. Others may like any or all of these desktops, I think they all have their own advantages. If you are or were a rabid Windows fan there is something there for you too!
The next major change for me was not Slackware. I began to work with more advanced cameras in 2013. This raised the need for a workflow systems change. So, while I had installed and used digiKam up to 4.0 I had been editing photos on my old XP system gradually moving to my remaining Windows system which had Windows 7, it had taken over and the XP system was decommissioned in 2012.
The display on my XP system was failing and Microsoft was starting to say farewell to XP. The time for change had come. I got more serious about open source photographic software and started to look for other products settling on digiKam. I have made a complete move and now rarely use Windows as a Photo Workflow tool. Further incentive came from the “beast” (which showed signs of fading display) when color consistency became a problem. I had already acquired a replacement which was running as my Windows machine, with a newer 17” Pavilion running 7 Pro. By 2015 I no longer wanted to use it as a Windows system and acquired an inexpensive HP Elitebook refurbished, with lots of features. The newer 17” HP Pavilion was due for Linux, replacing the “beast” now in its old age.
In 2016 Slackware released a new version. This loaded and set up easily but proved to have some problems with KDE apps, particularly Kmail. Also it had proved impossible to keep up with new releases of digiKam. None of the blame here belong to the Slackware distribution. I have some misgivings about what is hapening to KDE. I still like it but changes are hurting me. Perhaps a subject for another time.
At that point my main photo workflow and editing tool had become digiKam. To save the day with Kmail (Kontact) I took my slightly newer Acer laptop and loaded Kubuntu, then transferred all Kontact work to that system as the Kmail problems were less. I will not go into details but I have seriously questioned the use of Kontact (with Kmail). Again, that is another story! After about six months with Kubuntu I moved to Mint on my photo support laptop (the Acer). All this upset due to changes in KDE from 4 to 5 and (in my opinion) a less than well publicised process. I suspect its my own fault as I often do not read the KDE information in sufficient detail (there is too much of it).
With Kubuntu, I completed my move to a more current version of digiKam. I still am not running the latest version and have decided that is wishful thinking for now. With KDE undergoing a change with onset of KDE 5 and Plasma, In general I like the results but occasionally curse KDE. I use a series of 10 named virtual desktops, the ability to name them freely has changed and is no longer as useful as it was – an irritation but not an insurmountable obstacle.
Changing the Linux distribution you are used to is a hard decision. I started playing with Linux in 1995, finally settling on Slackware in late 1997. I needed a server for a Unix based applications I had developed for insurance companies and for other similar terminal based syatems I was working with. These systems, dumb terminals originally, were gradually moving to PC networks using Windows with terminal emulators. Now, after 16 years it was becoming more of an integrated Windows or Linux Workstation based world with servers using Unix/Linux showing exceptional reliability and lower cost for data and network management.
Perhaps Slackware was no longer the best choice. I started defining the distro I needed based on how I acrually used my network. A number of issues occur to somebody is this position but trying to think a current decision into the future is not a wise idea. In other words do not bet the farm on what you think is coming!
I started by listing the software I needed and deciding which distros met those needs. That was a very small list. I then backed up a bit and redefined the list to include distros which included KDE as the desktop along with other criteria which included auto and rolling update and a comprehensive supporting repository. I looked at all the frustrations with Slackware and decided that a replacement must load any needed supporting libraries. Providing semi or fully automatic updates was a desirable feature, many distros do provide the “semi” feature.
After a lot of trial and play, some with my interest in solid state hard drives, I settled on Linux Mint. Changes in KDE have made this a less definite move and I find this irritating, but I am assured that the basic KDE system will perform better when the changes are done. I like KDE 5 plasma version, except for the apparently incomplete customization changes. By the way: using Mint has nothing to do with the fact that I am 5/8 of Irish descent!
Other distros which appeal for the future are Manjaro and Antergos. However, I found their KDE apps not really usable. I look forward to future versions. They look really promising.
More change is coming, so there will be another part to this saga. To summarize to this point, I still have a “hybrid Linux/Windows” network. The Windows divorce is not yet final and the blame (from my viewpoint) lies with computer peripheral and other device manufacturers. They make often obscure driver requirements (competetive reasons?) and inflict them on the world. Perhaps there is a better way to drive all this gear, inventors needed.
So ... after what must seem like a rather messy process, I finally have my portable network the way I like it. How I actually use what I have is one subject in Part 3 of this rather long article. To be fair I have enjoyed messing with the gear and the entire process has fed my techie roots.
In summary I actually have a working four computer network with occasional sit-ins. The four are all fairly large laptops and the sit-ins are netbooks (including a Chromebook to satisfy curiosity), tablets and a Kobo reader. I will lay out my gear in Part 3. Everything is wirelessly connected using (basically) 802.11 g as the connection. Very little of the equipment is new, most at least 5 years old. All hung together with a good quality router (almost four years old now). There is good security but I am not telling – obscurity improves the odds against interlopers, I hope.
The final part (3) of this article (saga) is coming soon, writers block and snack breaks permitting. Stay tuned!
This article started, as the title suggests, as an expose of the way to use Linux to get an older laptop functioning in a more modern world. The experience that I accumulated with my own situation became the basis for what I write. Over twenty years of Linux experience made me go a certain way, a need to keep costs reasonable confirmed it. To keep it simple to read and understand I have uses an equally simple approach to entice both technical and non technical readers.
In the last 12 years I have gradually become totally portable. Well, not me, my computing environment. As a result I am immersed in the laptop culture. I am now an advocate of having all my computing eggs in one rich “laptop” basket.
Laptops have several distinct advantages. Your monitor, keyboard, CPU and – lets face it – your computing life are in one nicely portable and compact package. Laptops take up less desk space. With wireless features they avoid messy wiring problems (except for the inevitable wall plug). Fitting into a convenient and decorative luggage style bag, they can be moved and set up almost anywhere, speedily and without too much fuss. Tablets have some of the features of a laptop, portability needs make them less powerful. I now have a couple and they also communicate (Android seems to love Samba).
I still have my old mid 1980s Toshiba 3100, it still fires up and runs but with some screen damage, it is definitely old technology. The orange screen was a problem for me but it lasted for almost 8 years in active use. Crossed the Atlantic about 10 times, replacing a “luggable” at about one eighth of the weight.
I used to own a house. In that house I built a network with internet connections and a firewall to protect against cyber unpleasantness. Came time to contemplate a move and (gasp) downsize, my ego, my hobbies and what remained of my business, were encapsulated in a motly collection of hardware. I had two desk tops for playing with Windows and Linux, some debelopment work, one smaller desktop as a data storage system (less than 500Gb of storage on any of them. For convenience I also maintained a laptop (yep, only one). This equipment was set up as a home network, down sizing meant a severe process of elimination, the only part that stayed was the laptop. Oh, I also had a smaller older desktop which was set up as a Linux based firewall. That was the situation half way through the first decade of the new millenium. Working with several clients over the preceding 25 years raised a new scenario as the end of that decade came. The new millenium saw a number of changes in both equipment and work.
In 2010 my hand was forced, my network faced the chopper! Retirement crunch time loomed. I had to move in early 2011 now retired. I found a way to move my network. Laptops were the game I chose, Linux was the team I made my own. However, the actual business of downsizing was not an instant solution, the process evolved over several years of experiment and trial. My history with Linux helped and broad computer experience aided an abetted the process. None of these were strictly essential but did smooth the way. To duplicate this process for yourself: well all that experience helps but success is possible even for a rank amateur as improvements in Linux have made a change so much easier.
As a precursor and fortuitous action I bought (relatively inexpensively) another laptop. It was a refurbished 17” HP Pavilion, a huge beast. The “beast” had Windows Vista loaded, not one of Microsofts best offerings. I lived with it for about three months, realized that getting it usable was going to be costly, risky and frustrating. At that point I made up my mind to rely on Linux for day to day use.
Is the same period – 2007-9 – I acquired or was given three older laptops. These units had older versions of Windows which were no longer viable. The Linux daylight dawned. I started to experiment with Linux as a laptop operating system, including my recently purchased “beast” I soon had al these machines loaded and communicating via ethernet. A few bucks and some agony later the cables of ethernet were replaced with wireless. What made this easy was the discovery that Linux worked very well over a wireless network. I already had done that with one laptop but needed to make it happen for several! It was not the easiest thing to do at that time. At this date in 2017 it has become very easy to set up Linux for wireless, also it has been the easiest networking approach I have found. Samba is the software which makes a hybrid Windows/Linux network function well. In 2006-7-8 it has had minor setup difficulties which disappeared by 2010. If attempting this hybrid networking feat always load Samba to avoid frustration. Instruction on its use is beyond the intended scope of this rather simplistic discussion.
What did all this cost? Relatively speaking, a pittance. Linux was downloaded over the Internet for free. Being already a Slackware user I actually had the CD/DVD media on hand but went for a newer version. The downloads were free. I purchsed wireless adapters for two of the older laptops, the “beast” and one of the others already had built in adapters (all 802.11B, 2.4Ghz). I already had a wireless router, an Internet connection and one wireless connected Windows laptop. Connecting the lot went well and the extended laptop network came together. The beast now had Linux. Slackware 11. Four Linux laptops, one Linux desktop, worked well together. Using Samba, one Windows laptop and the Windows desktop were soon talking accross the network, happily exchanging files, all connected to the Internet through the common router.
Thus was the seed from which I then cultivated my new moveable feast the new transportable network was born.
Linux was the savior in all this exercise and the basis of my portability to come. Initially, although this started as a need to dispose of Windows Vista, I soon generated personal enthusiasm. I exhanged the hard drive (320Gb) in the beast for a larger drive (750Gb) and loaded Slackware. The system set up easily with the network connecting almost immediately. The only variation was to load Libre Office in place of Open Office. I use Kmail as part of Kontact, a truly excellent PIM package included in the Slackware distribution.
Before I got that far I read a lot (mostly nonsense) about how badly laptops respond to Linux. The nay sayers cited examples of missing drivers, incompatible hardware and lack of software. Some brands apparently do have problems, I have not encountered any myself that have not had a relatively simple answer.
All the older laptops and the beast were HP or Compaq productes. All four – no exceptions – loaded the OS and ran wihout problem. I will concede that some brands pose a bigger challenge, I have found a couple. But, generally., laptops I have loaded have run immediately and required very little or no tweaking. There were a couple of nervous days early in the game. Minor problems I have run into related to manufacturers who bought into Windows supremacy propaganda, placing Windows related “features” on their systems. I have generally ignored these “features” with impunity, occasionally bemoaning wasted keys and opportunites.
The horrible doom and failures I read about did not materialise. What eventually condemned the older laptops in the end was they wore out. It became impossible to fix problems and new technology replaced how they operated. Linux has kept pace with that technology and now handles most situations with built in drivers and inclusions in the “kernel”. So new hardware parts were a problem. Linux was not.
So by the time my 2010 crunch hit me I had learned a lot, but my test beds were not the real answer, too slow or had need of unavailable or over priced parts.
I ended up doing what I wanted, changing over my network to laptops but had to acquire new hardware. In 2011 I acquired a new HP Pavilion 17”., an Acer 15.6”, and a netbook. The netbook was a mistake I will tell about that another time. My Windows laptop started to fade (screen failure) and I looked at completely abandoning Windows. The “beast” soldiered on and is still going, now almost nine years old, but display brightness is an issue as it fades..
Buying new hardware meant that I got pre loaded Windows whether I wanted it or not, so I had Windows 7 Home in triplicate! Considering that all were going to be Linux soon and there is no way of getting that cost back I lay back and accepted my fate. I did need to replace my dying Windows XP syatem so I intended to use one of the three new devices. When the smoke cleared two devices went to Linux. Other arrangements were more convenient than Windows but I keep it around to educate myself and for som devices which have overly complex Linux connection issues.
Most devices, especially printers do connect to recently released Linux distributions, that “tame” Windows system is becoming less necessary. Six years later I have got Linux working happily for all that I need. I have no desktops and I can reach all my printers except one, without buying extra software or getting special drivers. In 2009 I actually purchased a Linux printer handler to simplify multiple systems using them. By 2015 I no longer need that as Linux inclusions can access all the printers I have tried except my label printer. A Linux solution is available for that label printertoo, but I have not used it because the label editor software seems to be restricted to Windows.
I have found that complete flexibility needs an available Windows system. I do not usually work on my Windows devices as I am not entirely comfortable with Windows 10. This comes from the unfamiliar and rather awkward UI style. I know some people who really do like it. This problem is a very much a matter of taste.
So my intent of becoming entirely Linux has not been realised. I actually have two Windows 10 units.
One (Windows Pro) acts as a peripheral server for the label printer, a large (5 Tb) backuo storage device and a Canon printer which seems happier with Windows. The second is still Windows 10 Home used almost entirely as Google Earth tool. I got it to raise my understanding of Windows 10 and it has been very good for that.
Recently I have also acquired a Chromebook (also HP but not the latest model. I found one at a very good price and wanted to see what it could do. This is NOT part of my network as it is not a sophisticated communicator. It does some things quite well and I use it for a quick Utube or Facebook access when I am otherwise involved with other activities. I also use a diary app which I can bring up on any device through Chrome, it can be used with that too. The problem I found is related to the fact that I am aging. The Chromebooks are generally small and my eyesight is getting weaker. Therefore I am not likely to adopt that model as my main workstation. To be fair, newer version are now appearing with larger displays, so even an old fogey might look at the simplicity and be happy with a purchase. In fact, the ease of use and simplicity may well a good move for any of my peers who do not feel computer literate, but better manuals are needed to provide for that type of user.
I also have that netbook that came with Windows 7 Home. It was an early convert to 32 bit Slackware and I use is rather less that I originally expected. A mistake in purchasing which has taught me a lot but – surprisingly - cost very little! The problem with netbooks is the very small screen and poor resolution from my point of view. Also there was noCD/DVD drive so I purchased an inexpensive USB accesory, this proved far more useful than the netbook so that mistake actually did some good.
While photography is much more my current bent, I do love computers and my techie roots still need feeding. So my hobby is also hybrid – computers/cameras. Now that most photography is digital and computing oriented, the mix is an obvious move for me.
In part 2 of this rather wordy (now 3 part) article I will discuss in greater detail the Linux saga with my laptops, along with the surprisingly few problem.
This article covers the content of the Certified Information Systems Security Professional ( CISSP) examination content. The article also addresses the IEEE and ACM curriculum of the Computer System Security. The scope of the article is large and as such the article will be divided into various sections as we progress through the article. The following topics will be covered:
The text book of Stallings and MIT-OCW course cover broad areas and well suited for computer systems security for enterprise and small business. In case you need to implement computer security measures, please contact one of our Engineers.
1.0 Computer Security- Principals and Practice- Stallings
2.0 Computer Systems security- MIT OCW Weblink
Business Development websites based on word press frameworks are a popular and well suited platform for various small and medium sized businesses. Word press websites are well suited to describe product, service and solutions that most of the small businesses specialize in.
In a complex service based industry - that is the main focus for various trade related businesses- digital marketing activity are well suited for word press platforms. The business owner can describe and educate potential customers using various blogs and news postings
A roofing contractor can describe the various latest roofing techniques that a residential and commercial customer may find useful.